Rotation for the new generation
BeSafe iZi Twist seats are installed exclusively in reverse and feature smooth side-to-side rotation. In this way, they assume the BeSafe conviction that children should continue to travel in reverse gear as long as possible, because it is five times safer.
iZi Twist i-Size:
A counter-rotating seat for babies with rotation to both sides that can be used from 61 cm in height, after a restraint system for newborns.
Scandinavian high security with Plus Test
The chairs of the BeSafe iZi Twist family have the highest Scandinavian security, thanks to the BeSafe engineering team.
These chairs always travel in reverse gear, and have the prestigious Plus Test seal, awarded by the VTI laboratory in Stockholm. This seal certifies that they are one of the safest chairs on the market.
UNIVERSAL LEVEL TECHNOLOGY
Created to offer maximum safety and comfort
All three rotating BeSafe seat models have an installation method that is truly one of a kind: the Universal Level TechnologyTM system.
With it, a frequent problem in the seats of current cars is solved: its excessive inclination. To make passengers comfortable on sports models, manufacturers make seats with a support surface that is quite inclined. In a rear-facing child car seat, this causes the child to be in a too upright position, which worries parents.
The BeSafe Universal Level Technology system consists of a special design of the seat and the base that solves this problem, since it always allows its horizontal installation, regardless of the angle of the seat.
The seats of a car usually have between 5 and 20 degrees of inclination. Universal Level TechnologyTM eliminates any problems that may arise, allowing horizontal installation even on vehicles whose seats have a 20 degree tilt. In this way, Universal Level Technology lives up to its name, as it guarantees a completely horizontal installation on any seat.
In addition to its horizontal installation, the seat has four reclining positions, making it comfortable for children of any age.
BeSafe iZi Twist i-Size technical characteristics:
Two layers of security from the first steps
- Side impact protection (SIP) built into the seat
- Additional SIP + side protection with custom shape
- Soft, protective headrest with Dynamic Force Absorber ™
- Pass the most demanding test in the world: the Plus Test
- Meets the latest UN R129 standard
- Allows children to ride up to 5 times safer rear facing, up to approx. 4 years old
Latest technology functionality for daily use:
- Magnetic Belt Assistants ™ facilitate access
- Adjustable thanks to its lateral rotation
- Adjustable backrest inclination once mounted
- Visual and auditory indicators to check the assembly
- Headrest and seatbelt adjustment in one step
Individualized comfort:
- Universal Level Technology ™ for the best angle in any car
- High-quality materials
- Two-Fit Cushions ™ for individual adjustment to each child
- Exceptional comfort with 4 reclining positions
- Adjustable headrest to 10 positions to adapt to growth
- Optimal air access through the rear ventilation system
WHY SHOULD WE NOT WORRY ABOUT THE SPACE BELOW THE BASE?
Since it is manufactured to accommodate the most inclined seats, a gap under the base can be seen in those vehicles with more horizontal seats. For the consumer, this space will not be familiar and you might think that the set is less stable, since other child seats usually rest on the upholstery of the vehicle. However, this space below the base is not a cause for concern.
The vehicle seat is not rigid, but is usually made of soft materials. In a head-on collision (the most common cause of serious childhood injury) the vehicle seat will still compress when pressure is exerted, thereby not providing stability to the child seat. Therefore, even in the case of seats supported by the car upholstery, forces are transmitted to the support leg and from there to the car floor and / or to the car chassis through the ISOfix anchors, and the rotation is prevents by means of the support leg or upper strap.